SIFLOW FC070 - Функциональные модули |
SIFLOW FC070 is based on the latest developments within the digital processing technology – engineered for high performance, fast flow step response, immunity against process generated noise, easy to install, commission and maintain
The SIFLOW FC070 transmitter delivers true multi-parameter measurements i.e. mass flow, volume flow, density, temperature and fraction
SIFLOW FC070 is designed for integration in a variety of automation systems, i.e.
- Central mounted in S7-300, C7
- Decentralized in ET 200M for use with S7-300 and S7-400 as Profibus DP masters
- Decentralized in ET 200M for use with any automation system using standardized Profibus DP masters
- Stand-alone via a MODBUS RTU master, i.e. SIMATIC PDM
The SIFLOW FC070 transmitter can be connected to all sensors of types MASS 2100, MC1 and FC300. |
Особенности
- Easy integration in SIMATIC S7 and PCS7
- Support of SIMATIC PDM configuration tool via Modbus
- Dedicated mass flow chip with high performance ASIC technology
- True 30 Hz update rate securing fast batching and step response
- Superior noise immunity due to a patented DFT (Discrete Fourier Transformation) algorithm
- Front end resolution better than 0.35 ns improves zero point stability and enhances dynamic turn down ratio on flow and density accuracy
- Advanced diagnostics enhancing trouble shooting and meter verification
- Built-in batch controller with two-stage control and compensation
- Digital outputs for direct batch control, frequency/pulse
- MODBUS RTU RS 232/485 interface for connection to SIMATIC PDM or any other MODBUS master
- Digital input for batch control, zero adjust
- Extensive simulation options for measurement values, I/O and errors
- Multiple LED’s for easy indication of flow, error and I/O state
- SENSORPROM technology automatically configures the transmitter during start-up providing:
- Factory pre-programming with calibration data, pipe size, sensor type and I/O settings
- Any values or settings changed by the user is stored automatically
- Automatically re-programming of a new transmitter, without loss of settings and accuracy
- Transmitter replacement in less than 3 minutes
- Four-wire Pt1000 measurement ensuring optimum accuracy mass flow, density and fraction flow
- Fraction flow computation based on 5’th order algorithm matching all applications
|
Область примененияSIFLOW FC070 mass flowmeters are suitable for all applications within the entire process industry, where a there is a demand for accurate flow measurement. The meters are suitable for measuring on liquid and gas.
The main applications for the SIFLOW FC070 transmitter can be found in the following industries:
- Food and beverage
- Pharmaceutical
- Automotive
- Oil and gas
- Power generation and utility
- Water and waste water
|
ДизайнSIFLOW FC070 is designed in an IP20 SIMATIC S7-300 enclosure and for use in central and de-central cabinets where sensors: FC300, MASS 2100 and MC1 are remotely mounted. |
ФункцииThe following key functionality is available:
- Mass flow rate, volume flow rate, density, temperature and fraction flow
- Two built-in totalizers which can freely be set for counting mass, volume or fraction
- 1 frequency/pulse/batch output, 1 two-stage batch output, 1 digital input
- Low flow cut-off
- Empty pipe detection
- Noise filter settings for different applications
- Simulation
- Two-stage batch controller
- Automatic zero point adjustment with zero point evaluation feed back
- Limit functionality
- Comprehensive status and error reporting
|
Технические данные
|
SIFLOW FC070
|
|
|
Measurement of
|
Mass flow, volume flow, density, sensor temperature, fraction A flow, fraction B flow, fraction A in %
|
|
Measurement functions
|
|
|
|
Totalization of mass flow, volume flow, fraction A, fraction B
|
|
|
Totalization of Mass flow, VolumeFlow, Fraction A, Fraction B
|
- Single and 2-stage Batch function
|
Batching function with the use of one or two outputs for dosing in high and low speed
|
|
|
4 programmable high/low limits for mass flow, volume flow density, sensor temperature, fraction A flow, fraction B flow, fraction A in %. Limits will generate an alarm if reached.
|
|
Digital input
|
|
|
Functions
|
Start batch, stop batch, start/stop batch, hold/continue batch, reset totalizer 1, reset totalizer 2, reset totalizer 1 and 2, zero adjust, force frequency output, freeze frequency output
|
|
High signal
|
- Nominal voltage: 24 V DC
- Lower limit: 15 V DC
- Upper limit: 30 V DC
- Current: 2 ... 15 mA
|
|
Low signal
|
- Nominal voltage: 0 V DC
- Lower limit: -3 V DC
- Upper limit: 5 V DC
- Current: -15 ... 15 mA
|
|
Input
|
Approx. 10 KΩ
|
|
Switching
|
Max. 100 Hz.
|
|
Digital output 1 and 2
|
|
|
Functions
|
- Output 1:
Pulse, frequency, quadrature pulse, quadrature frequency 2-stage batch, batch
- Output 2:
Quadrature pulse, quadrature frequency, 2-stage batch
|
|
Voltage supply
|
3 ... 30 V DC (passive output)
|
|
Switching current
|
Max. 30 mA at 30 V DC
|
|
Voltage drop
|
≤ 3 V DC at max. current
|
|
Leakage current
|
≤ 0.4 mA at max. voltage 30 V DC
|
|
Load resistance
|
1 KΩ to 10 KΩ
|
|
Switching frequency
|
0 ... 12 KHz 50% duty cycle
|
|
Functions
|
Pulse, frequency, quadrature pulse, quadrature frequency 2-stage batch, batch
|
|
Communication
|
|
|
MODBUS RS 232C
|
- Max. baudrate: 115, 200 baud
- Max. line length: 15 m at 115, 200 baud
- Signal level: according to EIA-RS 232C
|
|
MODBUS RS 485
|
- Max. baudrate: 115, 200 baud
- Max. line length: 1200 m at 115, 200 baud
- Signal level: according to EIA-RS 485
- Bus termination: Integrated. Can be enabled by inserting wire jumpers.
|
|
Galvanic isolation
|
All inputs, outputs and communication interfaces are galvanically isolated. Isolation voltage: 500 V
|
|
Power
|
|
|
Supply
|
24 V DC nominal
|
|
Tolerance
|
20.4 V DC ... 28.8 V DC
|
|
Consumption
|
Max. 10 W
|
|
Fuse
|
T1A / 125V, not to be changed by user
|
|
Environment
|
|
|
Ambient temperature
|
- Storage -40 °C ... +70 °C (-40 ... +158 °F)
- Operation 0 °C ... +60 °C (32 ... 140 °F)
|
|
Operation conditions
|
Horizontally mounted rail. For vertically mounted rail, the maximum operating temperature is +45°C (+113 °F).
|
|
Altitude
|
- Operation: -1000 m ... 1500 m
(pressure 795 hPa ... 1080 hPa)
- Storage: -1000 m ... 3500 m
(pressure 660 hPa ... 1080 hPa)
|
|
Enclosure
|
|
|
Material
|
Noryl, color: athracite
|
|
Rating
|
IP20 according to IEC 529 and DIN 40050
|
|
Mechanical load
|
According to SIMATIC standards (S7-300 devices)
|
|
Approvals
|
CE, cULus, ATEX Cat. 3 (II 3G EEx nA)
|
|
EMC performance
|
EMV-Directive 89/336/EWG (changed by 91/263/EWG, 92/31/EWG and 93/68/EWG)
|
|
NAMUR
|
Within the limits according to “Allgemeine Anforderung” with error criteria A in accordance with NE21
|
|
Programming tools
|
|
|
SIMATIC S7
|
Configuration trough backplane P-BUS and PLC program
|
|
SIMATIC PCS7
|
Configuration trough backplane P-BUS and PLC/WinCC faceplates
|
|
SIMATIC PDM
|
Through MODBUS port RS 232C and RS 485
|
|
Чертеж
SIFLOW FC070, dimensions in mm (inch) |
Схема подключения
|
Заказные данные
| Заказной № | Описание | Вес (кг) | Доставка | Мин. зак. (шт) |
| 7ME4120-2DH20-0EA0 | SIFLOW FC070 24V STANDARD SIMATIC S7-300 FUNCTION MODULE 40MM ENCLOSURE IP20 24V DC MODBUS FREQ./PULSE OUTPUT | 0.5 | 4 - 6 недель (B) | 1 |
| 7ME4120-2DH21-0EA0 | SIFLOW FC070 24V EX VERSION SIMATIC S7-300 FUNCTION MODULE 80MM ENCLOSURE IP20 24V DC MODBUS FREQ./PULSE OUTPUT WITH (EEXIA) IIC APPROVAL | 2 | 4 - 6 недель (B) | 1 |
|
Заказные данные [PDF] |
Аксессуары
| Заказной № | Описание | Вес (кг) | Доставка | Мин. зак. (шт) |
| 6ES7390-1AB60-0AA0 | SIMATIC S7-300, ПРОФИЛЬНАЯ ШИНА S7-300 ДЛИНОЙ 160MM | 0.24 | 3 - 5 недель (A) | 1 |
| 6ES7390-1AE80-0AA0 | SIMATIC S7-300, ПРОФИЛЬНАЯ ШИНА S7-300 ДЛИНОЙ 480MM | 0.695 | 3 - 5 недель (A) | 1 |
| 6ES7390-1AF30-0AA0 | SIMATIC S7-300, ПРОФИЛЬНАЯ ШИНА S7-300 ДЛИНОЙ 530MM | 0.76 | 3 - 5 недель (A) | 1 |
| 6ES7390-1AJ30-0AA0 | SIMATIC S7-300, ПРОФИЛЬНАЯ ШИНА S7-300 ДЛИНОЙ 830MM | 1.2 | 3 - 5 недель (A) | 1 |
| 6ES7390-1BC00-0AA0 | SIMATIC S7-300, ПРОФИЛЬНАЯ ШИНА S7-300 ДЛИНОЙ 2000MM | 2.75 | 3 - 5 недель (A) | 1 |
| 6ES7390-5AA00-0AA0 | SIMATIC S7-300, ЭЛЕМЕНТ ПОДКЛЮЧЕНИЯ ЭКРАНОВ СОЕДИНИТЕЛЬНЫХ КАБЕЛЕЙ | 0.12 | 3 - 5 недель (A) | 1 |
| 6ES7390-5BA00-0AA0 | SIMATIC S7-300, ТЕРМИНАЛЬНЫЙ ЭЛЕМЕНТ ДЛЯ ПОДКЛЮЧЕНИЯ 1 КАБЕЛЯ ДИАМЕТРОМ 3-8MM, УПАКОВКА ИЗ 2 ШТУК | 0.018 | 3 - 5 недель (A) | 1 |
| 6ES7390-5CA00-0AA0 | SIMATIC S7-300, ТЕРМИНАЛЬНЫЙ ЭЛЕМЕНТ ДЛЯ ПОДКЛЮЧЕНИЯ 1 КАБЕЛЯ ДИАМЕТРОМ 4-13MM, УПАКОВКА ИЗ 2 ШТУК | 0.05 | 3 - 5 недель (A) | 1 |
| 6ES7392-1AJ00-0AA0 | SIMATIC S7-300, 20-ПОЛЮСНЫЙ ФРОНТАЛЬНЫЙ СОЕДИНИТЕЛЬ ДЛЯ СИГНАЛЬНЫХ МОДУЛЕЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | 0.069 | 3 - 5 недель (A) | 1 |
| 6ES7392-1AM00-0AA0 | SIMATIC S7-300, 40-ПОЛЮСНЫЙ ФРОНТАЛЬНЫЙ СОЕДИНИТЕЛЬ ДЛЯ СИГНАЛЬНЫХ МОДУЛЕЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | 0.134 | 3 - 5 недель (A) | 1 |
| FDK:083H3001 | 10M CABLE - 105 DEGREES | 3.5 | 4 - 6 недель (B) | 1 |
| FDK:083H3002 | 25M CABLE - 105 DEGREES | 4.5 | 4 - 6 недель (B) | 1 |
| FDK:083H3003 | 75M CABLE - 105 DEGREES | 10 | 4 - 6 недель (B) | 1 |
| FDK:083H3004 | 150 M CABLE - 105 DEGREES | 14.5 | 4 - 6 недель (B) | 1 |
| FDK:083H3015 | MASS 2100 CABLE BLUE WITH PLUG, 5M | 0.956 | 4 - 6 недель (B) | 1 |
|
Аксессуары [PDF] | |
|
