Асинхронные серводвигатели 1PH7 - Для SIMOVERT MASTERDRIVES |
Технические характеристики
1PH7 - трехфазные электродвигатели - компактные, асинхронные двигатели с водяным охлаждением с короткозамкнутым ротором.
Их характерные особенности:
- большая плотность мощности в ебольшом объеме
- высокая степень защиты
- большой диапазон скоростей
- возможность регулирования скорости вплоть до 0 без уменьшения вращающего момента
- надежность
- низкие эксплуатационные расходы
- высокая плавность хода даже при самых низких скоростях
- интегрированные импульсные датчики скорости
- клеммная коробка для подключения силового кабеля
- контроль температуры датчиком KTY84
|
Особенности
- High power density with small motor dimensions
- High degree of protectionSchutzart
- Wide speed control rangeDrehzahlstellbereiche
- Speed to zero without torque reduction
- Robustness
- Very little maintenance required
- High transverse load capability
- High rotational accuracy event at very speeds
- Integrated encoder system for measuring motor speed, connected via connectors
- Terinal boxes for connecting power cables
- KTY 84 monitoring of motor temperature
- Variable ventilation systems
- Simple external ventilation through pipe connection
- Bearing with relubrication unit and insulated bearing (non-drive end) options
|
Область примененияAsynchronous servomotors can be used for the following applications:
Hoisting equipment:
- Hoists and drives in storage and retrieval systems for high-bay warehouses
Printing industry:
- Single and main drives for printing machines
Rubber, plastic, wire and glass:
- Drives for extruders, calenders, rubber injection moulding, film machines, conveyor systems
- Wire-drawing machines, cable stranding machines, etc.
General applications such as winding and coiling machines. |
Интеграция [PDF] |
Интеграция
Дополнительную информацию Вы можете получить, нажав кнопку с этим символом.
|
Технические данные [PDF] |
Технические данные1PH7 motors, frame sizes 100 … 160
|
Standard
|
Option
|
Type of construction
|
IM B 3
|
IM B 5 (only for sizes 100, 132), IM B 35
|
Degree of protection
|
IP55
|
–
|
Vibration severity
|
R
|
S SR
|
Shaft and flange accuracy
|
R
|
–
|
Shaft extension
|
With featherkey, half-key balancing
|
Smooth shaft extension with featherkey, full-key balancing
|
Terminal box
|
On top, cable entry from the right
|
Cable entry from the left or ND-end
|
Motor protection
|
KTY 84 in the stator winding
|
–
|
Encoder system (plug connection)
|
Incremental encoder HTL (with SIMOVERT MASTERDRIVES VC and MC)
|
Without encoder (with SIMOVERT MASTERDRIVES VC) sin/cos incr. encoder 1 Vpp (with SIMOVERT MASTERDRIVES MC) Absolute-value encoder (EnDat) 2048 p/r (with SIMOVERT MASTERDRIVES MC) 2-pole resolver (with SIMOVERT MASTERDRIVES MC)
|
Paint finish
|
Without paint coating (with impregnating resin coating)
|
Normal paint finish anthracite RAL 7016 Special paint finish "worldwide" RAL 7016, other colors on request
|
Bearings
|
Permanently lubricated deep-groove ball bearing for coupling and belt drive
|
Special version for increased speed
|
Cooling
|
Separate ventilation, the fan is axially mounted on the ND-end, air flow ND-end to D-end
|
Without separate fan, for pipe connection, air flow from D-end to ND-end
|
Brake
|
–
|
Holding brake with emergency-stop function, as a brake module on D-end
|
Gearbox mounting
|
–
|
The following gearboxes can be mounted 2-gear units 2LG4
|
1PH7 motors, frame sizes 180 … 225
|
Standard
|
Option
|
Type of construction
|
IM B 3
|
IM B 35
|
Degree of protection
|
IP55
|
–
|
Vibration severity
|
R
|
S SR
|
Shaft and flange accuracy
|
N
|
R
|
Shaft extension
|
With featherkey, half-key balancing
|
Smooth shaft extension with featherkey, full-key balancing
|
Terminal box
|
On top cable entry from the right
|
Cable entry from D-end, ND-end or the left
|
Motor protection
|
KTY 84 in the stator winding
|
–
|
Encoder system (plug connection)
|
Incremental encoder HTL (with SIMOVERT MASTERDRIVES VC and MC)
|
Without encoder (with SIMOVERT MASTERDRIVES VC) sin/cos incremental encoder 1 Vpp (with SIMOVERT MASTERDRIVES MC) Absolute-value encoder (EnDat) 2048 p/r (with SIMOVERT MASTERDRIVES MC) 2-pole resolver (with SIMOVERT MASTERDRIVES MC)
|
Paint finish
|
Normal paint finish anthracite RAL 7016
|
Primed Special paint finish "worldwide" RAL 7016, other colors on request
|
Bearings
|
Permanently lubricated deep-groove ball bearing for coupling drives
|
Cylindrical-roller bearing for belt drive Cylindrical-roller bearing for increased lateral forces Special design for greater maximum speed (only for types 1PH718. and 1PH7224)
|
Cooling
|
Separate ventilation, the fan is axially mounted on the ND-end, air flow from D-end to ND-end.
|
Without separate fan, for pipe connection, air flow from ND-end to D-end
|
Brake
|
–
|
Holding brake with emergency-stop function on D-end, suitable for coupling drive
|
Gearbox mounting
|
–
|
Prepared for fitting a ZF gear unit
|
Silencer
|
–
|
Silencer for reducing the sound pressure level (retrofit also possible)
|
1PH7 motors, frame size 280
|
Standard
|
Option
|
Type of construction
|
IM B 3
|
IM B 35
|
Degree of protection
|
IP55
|
–
|
Vibration severity
|
N
|
R
|
Shaft and flange accuracy
|
N
|
R
|
Shaft extension
|
With featherkey, half-key balancing
|
Smooth shaft extension with featherkey, full-key balancing
|
Terminal box
|
On the right (ND-end), cable entry from below, encoder connector (D-end)
|
On the left (ND-end), cable entry from below, encoder connector (D-end) On top (ND-end), in the case of a fan ND-end left or right, cable entry from the right, encoder connector (D-end) D-end on request
|
Motor protection
|
KTY 84 in the stator winding Additional KTY 84 as standby
|
–
|
Encoder system (plug connection)
|
Incremental encoder HTL (with SIMOVERT MASTERDRVES VC)
|
Without encoder (with SIMOVERT MASTERDRVES VC) Other encoders on request
|
Paint finish
|
Normal paint finish anthracite RAL 7016
|
Primed Special paint finish „worldwide“ RAL 7016 Other colors on request
|
Bearings
|
Bearing concept for coupling drive with relubricating device
|
Bearing concept for belt drive or increased lateral forces with relubricating device
|
Cooling
|
Separate ventilation the fan is axially mounted on the ND-end, air flow ND-end to D-end
|
Without separate fan, for single pipe connection Fan ND-end left or right Fan radially mounted on the D-end (air flow from D-end to ND-end) on request
|
Дополнительную информацию Вы можете получить, нажав кнопку с этим символом.
|
Опции
Code
|
Optionn description
|
In 1PH7 Asynchronous motor type
|
|
SH 100 to 160
|
SH 180 SH 225
|
SH 280
|
|
Standard paint in another color, RAL ...
|
O 1)
|
❒ 2)
|
❒ 2)
|
|
Special paint in another color, RAL ...
|
O 1)
|
❒ 3)
|
❒ 3)
|
C30
|
690 V winding
|
-
|
-
|
❒
|
G14
|
Fan group with air filter
|
-
|
O
|
❒
|
G80
|
POG 10 pulse encoder, prepared attachment
|
-
|
-
|
❒
|
K08
|
Encoder connector attachment facing
|
-
|
-
|
❒
|
K16
|
Additional normal shaft end (only available with no encoder)
|
-
|
-
|
❒
|
K31
|
2nd rating plate comes unattached in terminal box
|
Standard
|
❒
|
❒
|
K40
|
Relubrication drive-end and non-drive end
|
-
|
❒
|
Standard
|
K45
|
230 V standstill heating
|
-
|
-
|
❒
|
K55
|
Customer-specific entry plate for terminal box (plain text required)
|
-
|
❒
|
❒
|
K83
|
Terminal box rotation by +90 degrees (from standard position)
|
-
|
-
|
❒
|
K84
|
Terminal box rotation by -90 degrees (from standard position)
|
-
|
-
|
❒
|
K85
|
Terminal box rotation by +180 degrees (from standard position)
|
-
|
-
|
❒
|
L27
|
Insulated non-drive end bearing
|
-
|
❒
|
Standard
|
M03
|
Design for Zone 2 hazardous areas (in accordance with EN 50021/IEC 60079-15)
|
❒
|
-
|
-
|
M39
|
Design for Zone 22 hazardous areas (in accordance with EN 50281/IEC 61241)
|
❒
|
❒
|
❒
|
M83
|
Additional pulling thread on motor feet
|
-
|
-
|
❒
|
Y55
|
Atypical shaft end, drive side
|
O
|
O
|
O
|
Y80
|
Different rating plate data (plain text required)
|
O
|
O
|
O
|
Y82
|
Additional plate with customer information
|
O
|
O
|
O
|
❒ Option available
O On request
- Not available
1) Order by indicating option code (no plain text), e.g.: X01: RAL 9005 (jet black) X02: RAL 9001 (cream) X03: RAL 6011 (reseda green) X04: RAL 7032 (pebble gray) X05: RAL 5015 (sky blue) X06: RAL 1015 (light ivory)
2) Order with code R1Y (Plain text required when specifying RAL color).
3) Order with code R2Y (Plain text required when specifying RAL color). |
Характеристика
Дополнительную информацию Вы можете получить, нажав кнопку с этим символом.
| |
|