Motion Control - Преобразователь частоты SIMOVERT MASTERDRIVES

Область применения [PDF]

Для просмотра информации в формате PDF необходимо установить Adobe Acrobat Reader.

Область применения

Преобразователи частоты SIMOVERT MASTERDRIVES

Motion Control

The MASTERDRIVES Motion Control (MC) frequency converters are specially designed for industrial servo drive applications.

In addition to the well-proven modular hardware concept, SIMOVERT MASTERDRIVES Motion Control offers a modular software featuring

freely interconnectable function blocks and
integrated technology functions.

The MASTERDRIVES Motion Control series is compatible regarding

communication
technology
operator control and visualization

and is available for line voltages of 3-phase 380 V to 480 V AC, 50/60 Hz, and in the following designs, depending on the power rating:

Compact PLUS (0.55 kW to 18.5 kW)
Compact units (2.2 kW to 37 kW)
Chassis units (45 kW to 250 kW).

The MASTERDRIVES Motion Control concept is characterized by:

a very high level of dynamic response
positioning
angular synchronism between drives
cam plates.

In thus satisfies the most stringent demands placed on servo technology.

The MASTERDRIVES Motion Control converters are excellently matched to Siemens compact and highly dynamic servomotors.

These synchronous servomotors and asynchronous servomotors are primarily suited for highly dynamic applications.

Corresponding to highly dynamic MC control on the motor side, MASTERDRIVES AFE (Active Front End) using active line-angle-oriented vector control is now available on the line side for optimum energy supply.

MASTERDRIVES AFE is characterized by:

absence of system perturbations, i.e. very good overall power factor
stall-protected operation even in the event of supply dips and supply failure
highly dynamic rectifier and regenerative units
reactive-power compensation possible
four-quadrant operation.

The program is rounded off by a complete spectrum of system components and accessories.

Customer-specific, integrated solutions (automation - converter - motor) are available for many applications in all industrial sectors.

For MASTERDRIVES, easy-to-use project-planning tools (PATH) and start-up tools (DriveMonitor) are available.

Siemens' world-wide service and sales network enable all our customers and MASTERDRIVES users to obtain direct access to expert advice and project planning as well as training and service.

Customized solutions

The compact and chassis units can be used in air-cooled or water-cooled control cabinets and plant configurations.

Rectifier and regenerative units can also be provided as Active Front End units.

Our sales departments, working with our applications workshops, will help you to find the best solution for your requirements.

Дополнительную информацию Вы можете получить, нажав кнопку с этим символом.

Технические данные

Technical data for converters, inverters, AFE inverters, rectifier units, rectifier/regenerative units and braking units
Cooling types	Forced ventilation with integral fan
Air cooling
Permissible ambient and cooling-medium temperature during operation	0 °C to +40 °C or 0 °C to +45 °C³)
Water cooling ⁴)
Operating pressure	0.8 to 1 bar
Cooling water inlet temperature	+5 °C to 30 °C
Cooling-water requirement	dependent on enclosure size
Particle size	≤ 0.5 mm
Permissible ambient temperature during operation	0 °C to + 40 °C²)
Permissible ambient temperature
During storage and transport	-25 °C to +70 °C
Installation altitude	≤ 1,000 m above sea level (100 % load capability) > 1,000 m to 4,000 m above sea level
Humidity rating	Relative humidity ≤ 95 % Moisture condensation not permissible
Climatic category	Class 3K3 to EN 60 721-3-3
Environmental class	Class 3C2 to EN 60 721-3-3
Insulation	Pollution degree 2 to DIN VDE 0110-1 (HD 625.1 S1: 1996) Moisture condensation not permissible
Overvoltage category	Category III to DIN VDE 0110-1 (HD 625.1 S1: 1996)
Overvoltage strength	Class 1 to DIN VDE 0160
Degree of protection	To DIN VDE 0470, Part 1 (EN 60 529) IP00 and IP20
Protection class	Class I to EN 61 140
Shock protection	To DIN VDE 0106 Part 100 and BGV A2 (previously VBG 4)
Radio-interference level	To EMC product standard EN 61 800-3 for variable-speed drives
Standard	No radio-interference suppression
Options	Class B1 or Class A1 to EN 61 800-3
Additional information	The units are motor-side ground-fault-protected, short-circuit-proof and may be operated under no-load conditions
Paint finish	For indoor installation
Mechanical specifications	To EN 60 068-2-6
For stationary applications: Constant amplitude
of deflection	0.075 mm in the frequency range 10 Hz to 58 Hz
of acceleration	9.8 ms^-2 (1 x g) in the frequency range > 58 Hz to 500 Hz
During transport:
of deflection	3.5 mm in the frequency range 5 Hz to 9 Hz
of acceleration	9.8 ms^-2 (1 x g) in the frequency range > 9 Hz to 500 Hz
Approvals
according to UL and CSA	UL file No.	CSA file No.
Converters and inverters	E 145 153	LR 21927, LR 219278-67³)
Rectifier units and rectifier/regenerative units¹)	E 145 153	LR 21927
Braking units and load resistors	E 145 153	LR 21927
Radio-interference suppression filter⁵)	E 145 153	LR 21927-67R
Free-wheeling diode on the DC bus¹)	E 145 153	LR 21927
Line communicating output reactors (iron)	E 103 902
3NE3 and 3NE8 series fuses are UR	E167357/JFHR2

1) UL and CSA only apply in combination with SIMOVERT MASTERDRIVES converters or inverters.

2) With derating to 50 °C.

3) For Compact PLUS units.

4) For compact und chassis units.

5) In preparation for radio-interference suppression filter 6SE70...-.EP87-...for Compact PLUS units.

Дополнительную информацию Вы можете получить, нажав кнопку с этим символом.

Motion Control

Motion Control - Преобразователь частоты SIMOVERT MASTERDRIVES

Область применения [PDF]

Область применения

Преобразователи частоты SIMOVERT MASTERDRIVES

Motion Control

Технические данные