Motor type
|
Permanent-magnet synchronous motor
|
Magnet material
|
Rear-earth magnet material
|
Insulation of the stator winding (in accordance with EN 60034-1, IEC 60034-1)
|
Temperature class F for a winding temperature of Δ T = 100 K at a coolant (water) inlet temperature of +25 °C (+77 °F)
|
Construction type (in accordance with EN 60034-7, IEC 60034-7)
|
IM B14 for shaft height 200 IM B35 for shaft height 280
|
Degree of protection (nach EN 60034-5, IEC 60034-5)
|
IP54
|
Kühlung (in accordance with EN 60034-6, IEC 60034-6)
|
Water cooling
|
Thermal motor protection (in accordance with EN 60034-11, IEC 60034-11)
|
KTY 84 temperature sensor in stator winding
|
Paint finish
|
Anthracite (RAL 7016)
|
2nd rating plate
|
A second rating plate is provided for all motors
|
Shaft end (in accordance with DIN 748-3, IEC 60072-1)
|
Hollow shaft
Inside diameter di = 152 mm (5.98 in) for SH 200
Inside diameter di = 250 mm (9.84 in) for SH 280
|
Radial eccentricity, concentricity and axial eccentricity (in accordance with DIN 42955, IEC 60034-14)
|
Tolerance class N (normal)
|
Vibration severity (in accordance with EN 60034-14, IEC 60034-14)
|
Grade N (normal)
|
Sound pressure level (in accordance with DIN EN ISO 1680)
|
1FW320. 70 dB (A) + 3 dB (A) tol. 1FW328. 70 dB (A) + 3 dB (A) tol.
|
Flange accuracy
|
Grade N (normal)
|
Bearings
|
Roller bearings with permanent grease lubrication (lubrication over the bearing lifetime), Relubrication unit (optional)
|
Encoder systems, integrated
|
- Resolver, multipole, 2p=8,
standard
- Incremental encoder sin/cos 1 Vpp,
(I-2,048), optional
Absolute encoder EnDat (A-2,048), optional
|
Connection
|
Terminal box for power cable, connector for encoder signals and KTY 84
|